NEXT GENERATION EVLA
A New Standard in Vein Ablation
Why Laser Outperforms RFA in Modern Vein Ablation
The use of RF probes for thermal ablation of veins is a safe and effective method. However, in order to have optimal efficacy, the RF probe requires good contact with the vein wall. In contrast, a laser beam continues to propagate until hitting an absorbing medium (the vein wall) and as such, has significantly less sensitivity to contact. As a result, the laser may offer superior performance on larger veins, and on perforator veins (B. Mese, 2015, KR. Woodburn, 2020).
When using a laser, the energy emitted can be tailored more closely to the specific patient and local vein conditions by controlling the power and speed of pull back at the treatment site. The energy can be delivered through a very thin fiber (1.3mm or less) which can be deployed through a slim needle. This unmatched versatility opens up a new treatment approach - Total EVLA, using one fiber to treat all veins in one treatment session (GSV, SSV, perforator veins, tributary veins) with optimal efficacy, safety and aesthetic results, an approach which is much more difficult and costly with RFA.
The Next Generation of Endovenous Laser Therapy
neoLaser’s next generation EVLA solution combines advanced fiber technology, precision laser systems, and an unwavering commitment to excellence - delivering safe, consistent, and elegant results above and below the knee, across perforators, and in delicate anatomic areas.
NEXT GENERATION EVLA
4 Reasons You Should Choose neoLaser for Your EVLA Toolkit
NEXT GENERATION EVLA
Validated by Science. Proven in Practice.
neoLaser’s 1940 nm platform with CORONA Infinite Ring Fiber has been validated in multiple peer-reviewed studies as a safe and effective advancement in endovenous laser ablation. The 1940 nm wavelength offers three-times higher water absorption than 1470 nm, producing efficient vein closure with less thermal spread and postoperative discomfort. Clinical data and pre-clinical research confirm high occlusion rates and minimal collateral damage, establishing neoLaser as the most refined and controlled EVLA system available today.
Higher Closure vs RFA
neoV's closure rates, for both truncal and perforators, were higher than RFA (KR. Woodburn, 2020)
Less Thermal Damage
The neoV1940 and radial fiber can be used at lower parameters with the same success rate (L. Palombi, 2024)
Fast Recovery
Quicker return to activity with EVLA than RFA (O. Bozoglan, 2016)
NEXT GENERATION EVLA
Advanced Fiber Technology
neoLaser’s leadership in EVLA begins with its proprietary fibers. Every fiber is designed and manufactured for optical purity, temperature stability, and mechanical reliability, ensuring consistent energy delivery across procedures and wavelengths. Each fiber features:
Unique multiple ring emission reducing power density and enabling uniform controllable heating without high peak temperatures and carbonization.
Unique multiple ring emission reducing power density and enabling uniform controllable heating without high peak temperatures
and carbonization.
Fully fused quartz tips that ensure ultimate safety even in extreme conditions.
Fully fused quartz tips that ensure ultimate safety even in extreme conditions.
The brightest visible aiming beam on the market allowing real time visualization of fiber position and structure even for obese patients.
The brightest visible aiming beam on the market allowing real time visualization of fiber position and structure even for
obese patients.
ADVANCED FIBERS AND PROBES
Total EVLA Infinite Ring Fiber
One Fiber to Treat All Veins
When using a laser, the energy emitted can be tailored more closely to the specific patient and local vein conditions by controlling the power and speed of pull back at the treatment site. The energy can be delivered through a very thin fiber which can be deployed through a slim needle. This unmatched versatility opens up a new treatment approach - Total EVLA, using one fiber to treat all veins in one treatment session (GSV, SSV, perforator veins, tributary veins) with optimal efficacy, safety and aesthetic results, an approach which is much more difficult and costly with RFA.
The TOTAL EVLA Infinite Ring Fiber provides cylindrical emission from a continuous section of ~4mm length, and having a 1.2mm outer diameter with a thick 500 micron core body, it is the first ever fiber optimized for all vein types and easy insertion through 16G needles.
-
Rigid body for easy handling in all vein types
-
Fully fused quartz tip for maximal safety
-
1.2mm diameter fitting 16G needles
-
Unique emission equivalent to numerous radial rings in a long continuous section
-
Optimal uniformity of energy deposition along vein
-
Potentially reduces sticking and carbonization in vein due to unique emission profile
-
No front firing
NEXT GENERATION EVLA
CORONA Infinite Ring Fibers
Building on a strong foundation of fiber innovation, neoLaser's CORONA Infinite Ring Fiber represents the next leap forward in laser energy control. Unlike traditional radial or bare fibers, Infinite Ring emits energy through multiple concentric rings along a 3–4 mm cylindrical section, distributing power evenly in all directions. The fibers are specifically designed to enable lower power density, and a much smoother and gradual rise in temperature inside the targeted cavity. This enhances the uniformity and homogeneity of the thermal application inside the tract. The smooth cap allows easy and safe insertion and sufficient flexibility for small and curved areas.
-
No front emission for safety near the SFJ
-
Emission through multiple rings
-
Lower energy density per ring
-
Homogeneous energy distribution
-
Cylindrical profile of ~ 4mm in length
-
Fully fused quartz tip for maximal safety
ADVANCED FIBERS AND PROBES
CORONA 360 Fibers
The 360° emitting medical probe is an excellent tool for the endovenous laser treatment of the vena saphena magna and the vena saphena parva in patients with venous insufficiency. With its 360° emission and optimal handling, the CORONA 360 Fused Fiber® is a trendsetting development for medical applications in phlebology. The ink free marking eases positioning of the probe inside the vein. The fiber offers a fused tip, greatly enhancing safety of the procedure. Additionally, the dedicated neoLaser Introducer Set is perfectly complementing the CORONA 360 Fused Fiber.
-
Optimized laser emission profile with no front emission for safety near the SFJ
-
Fused fiber tip for maximal safety
-
Precise laser marking
PRECISION LASER SYSTEMS
The neoV 1940
The Laser Designed for Minimal Side Effects
neoLaser's neoV1940 laser represents the next leap in clinical performance for EVLA, having a penetration depth below 1mm, enabling thermal damage which is contained within the wall of the vein, and preventing collateral damage, leading to less pain, bruising, and sensory disturbances, while maintaining perfect long term closure rates.
PRECISION LASER SYSTEMS
The neoV 1940
Consistent Performance with No Downtime
The neoV1940 is the most advanced 1940nm EVLA system on the market, providing superb output power precision and stability throughout the system’s lifetime and during the workday due to its use of a full metal housing coupled with optimal cooling, and utilization of the best diode source on the market. neoLaser chooses only the best materials and components for its platform, providing unmatched reliability and peace of mind for your practice.
COMMITMENT TO EXCELLENCE
Resource Library
neoLaser has committed itself from its launch to be at the forefront of EVLA technology, offering the most advanced platform globally for optimal, consistent and uncompromising clinical performance. This commitment is as durable as the neoV laser. When choosing to be a member of the neoV family, you choose to remain at the front, knowing neoLaser will continue innovating on fibers and lasers thus ensuring your practice will have access to the best tools possible.
Brochures
CORONA Infinite Ring Fiber
The neoV 1470 for EVLA with CORONA Fiber™ technology
neoV1940 - The New and Optimal Tool for Endovenous Treatment
TOTAL EVLA Infinite Ring Fiber 500um 1.2mm Fused EU
EVLA Laser Systems
Targeted laser energy safely and effectively restores healthy circulation, improves patient comfort and increases patient satisfaction.
EVLA Fibers
The CORONA Infinite Ring Fiber and Corona 360 Fused Fibers are an innovative fiber for endovenous laser treatment that ensures uniform energy delivery along the vein wall, minimizing sticking, carbonization, and thermal damage. The fused tip design provides maximum safety and represents the latest technology in endovenous laser treatment.
AESTHETICS
Vascular Laser Treatment
The neoV980nm laser is a versatile solution for aesthetic vascular treatments, offering physicians and patients a safe, effective, and minimally invasive approach. With the ability to target a wide range of vascular lesions, it ensures excellent clinical outcomes and high patient satisfaction.
The neoV980 can be used to treat:
Blue Spider Veins
Telangiectasias
Reticular Varicose Veins
Angiomas
Key benefits of laser-based treatment include: no need for medication, no surgical incisions, and the possibility to perform hybrid treatments. The 980nm wavelength allows for precise targeting of vascular lesions, even in delicate areas like the face, while minimizing risks of complications.
AESTHETICS VASCULAR PRODUCTS
Brochure
neoV980 for Spider Veins
NEOV 980NM LASER SYSTEM AND ACCESSORIES
Vascular Treatments for Aesthetics with neoV 980nm Laser Products – System and Accessories
The neoV980nm laser system, dual connector carrying fiber and focusing hand pieces with various spot sizes are what you will need for better aesthetic outcomes.
Get In Touch
Reach Us
Company
Home
EVLA
Proctology
Products
About Us
Distributors
Legal
Privacy Policy
Terms of Service
©2025 neoLaser. All Right Reserved.
Get In Touch